Detroit Diesel — Print Preview - C:\Temp\APTCACHE\6SE412A\6SE412A Detroit Diesel

1.14 PILOT BEARING 1.14 PILOT BEARING Perform the following procedures for removal and installation of the pilot bearing. 1.14.1 Pilot Bearing Removal Remove the pilot bearing as follows: 1. Remove the transmission. 2. Remove the clutch from the flywheel. 3. Install a suitable pilot bearing extractor on the bearing. 4. Install a suitable puller on the extractor. 5. Remove the bearing. See Figure 1-75. 1. Flywheel 3. Bearing Extractor 2. Guide Stud 4. Puller Figure 1-75 Pilot Bearing Removal 1.14.2 Pilot Bearing Installation Install the pilot bearing as follows: 1. Lubricate the new bearing with longlife grease. All information subject to change without notice.

1-100 6SE412 0403 Copyright © 2004 DETROIT DIESEL CORPORATION