MBE 4000 SERVICE MANUAL [c] Install the spring garter into the ring. The garter spring joint should be positioned 180 degrees from the gap in the piston ring. See Figure 1-92. 1. Garter Spring 3. Garter Spring Joint 2. Piston Ring Figure 1-92 Installing the Garter Spring 5. Using ring pliers, install the rings.Make sure the word "TOP" on each ring is facing toward the crown of the piston. Install the rings in the reverse order of their removal; from the bottom to the top of the piston. All information subject to change without notice. 6SE412 0403 Copyright © 2004 DETROIT DIESEL CORPORATION 1-119