1.17 PISTON, PISTON RING, AND CONNECTING ROD 4. Check the tolerance code on the piston and compare it to the tolerance code on the cylinder liner. See Figure 1-95. 1. Piston 2. Cylinder Liner Figure 1-95 Tolerance Codes 5. Check the condition of the piston rings. Replace any worn, damaged, or chipped rings. Refer to section 1.17.3. 6. Check the connecting rod for any unusual condition. Refer to section 1.17.3.2. 7. Measure the diameters of the bearing shell bore and crankshaft journals. Refer to section 1.17.3.3 for instructions. All information subject to change without notice. 1-122 6SE412 0403 Copyright © 2004 DETROIT DIESEL CORPORATION