MBE 4000 SERVICE MANUAL Table 1-83 Bearing Journal Specifications Table 1-84 Bushing Specifications Valves The valve removal/installation specifications are listed in Table 1-85. The valve standback specifications are listed in Table 1-86. The valve guide inside diameter measurements are listed in Table 1-87. The spring specifications for the intake and exhaust valves are listed in Table 1-88. The valve lift specifications are listed in Table 1-89. The measurements for valve lash checking are listed in Table 1-90. The measurements for valve seat specifications for an EGR engine are listed in Table 1-91. All information subject to change without notice.
6SE412 0403 Copyright © 2004 DETROIT DIESEL CORPORATION 1-193 Repair Stage: mm (in.) Diameter: mm (in.) Standard 93.980-94.000 (3.7000-3.7007) Undersize - 0.10 (0.004) 93.880-93.900 (3.6960-3.6968) Undersize 0.25 (0.010) 93.730-93.750 (3.6901-3.6909) Undersize 0.50 (0.020) 93.480-93.500 (3.6803-3.6811) Undersize 0.75 (0.030) 93.230-93.250 (3.6705-3.6712) Undersize 1.00 (0.040) 92.980-93.000 (3.6606-3.6614) Description Dimensions:
mm (in.) Inside Diameter of Bushing 52.05-52.07 (2.049-2.050) Outside Diameter of Bushing 57.080-57.100 (2.2472-2.2480) Inside Diameter of Bushing Bore 57.000-57.019 (2.2441-2.2448) Bushing Interference Fit 0.061-0.100 (0.0024-0.0039) Maximum Permissible Out-of-Round in Bushing Bore 0.01 (0.0004)