Rocker Arm The rocker arm mounting bolt specifications are listed in Table 1-92. Listed in Table 1-93 are the rocker arm specifications. Listed in Table 1-94 are the rocker arm bushing specifications. Table 1-92 Specifications, Rocker Arm Mounting Bolts Table 1-93 Rocker Arm Specifications Table 1-94 Rocker Arm Bushing Specifications All information subject to change without notice. 1-196 6SE412 0403 Copyright © 2004 DETROIT DIESEL CORPORATION Size Max.
Shaft Length Torque Value M12 91 mm (3.6 in) 60 N·m (44 lb·ft) additional 90 Description Stage Specification Outside Diameter of Valve Tappets Normal 29.931-29.952 mm (1.1784-1.1792 in) Outside Diameter of Valve Tappets Repair Stage I 30.444-30.465 mm (1.1986-1.1994 in) Diameter of Tappet Seats (in cylinder block) Normal 30.000-30.021 mm (1.1811-1.1819 in) Diameter of Tappet Seats (in cylinder block) Repair Stage I 30.500-30.525 mm (1.2008-1.2018 in) Total Length of Pushrods 345.0-346.5 mm (13.58-13.64 in) Maximum Pushrod Warpage 0.5 mm (0.02 in) Maximum Length of Rocker Arm Mounting Bolts 91 mm (3.6 in) Description Specification, mm (inch) Bushing Inside Diameter (when installed) 25.005-25.021 mm (0.9844-0.9851 in) Shaft Diameter 24.967-24.980 mm (0.9830-0.9835 in)