Detroit Diesel — Print Preview - C:\Temp\APTCACHE\6SE412A\6SE412A Detroit Diesel

2.1 INJECTOR UNIT PUMP EYE INJURY To avoid injury from flying parts when working with components under spring tension, wear adequate eye protection (face shield or safety goggles). 8. Carefully loosen the injector unit pump mounting bolts about 6 mm (1/4 inch), but do not remove them yet. See Figure 2-4. 1. Mounting Bolt 2. Head of Unit Pump Figure 2-4 Loosen the Mounting Bolts 9. Using the cranking tool (J 46167 or 407 589 00 63 00), rotate the crankshaft until the cam pushes the unit pump upwards. All information subject to change without notice. 2-6 6SE412 0403 Copyright © 2004 DETROIT DIESEL CORPORATION