Detroit Diesel — Print Preview - C:\Temp\APTCACHE\6SE412A\6SE412A Detroit Diesel

2.1 INJECTOR UNIT PUMP 11. Remove both mounting bolts completely. Carefully pull the unit pump out of the cylinder block. See Figure 2-6. 1. Mounting Bolt 3. Cylinder Block 2. Unit Pump Figure 2-6 Removing the Unit Pump 12. Check the injector unit pump for wear or damage. If any is found, replace the entire component. It is not repairable. 13. Remove and discard the two O-rings on the unit pump shaft. 2.1.2 Injector Unit Pump Installation Install the injector unit pump as follows: 1. Lubricate two new O-rings with a light coating of engine oil. All information subject to change without notice. 2-8 6SE412 0403 Copyright © 2004 DETROIT DIESEL CORPORATION