Detroit Diesel — Print Preview - C:\Temp\APTCACHE\6SE412A\6SE412A Detroit Diesel

MBE 4000 SERVICE MANUAL 3.1 OIL PAN Perform the following procedures for removal and installation of the oil pan. 3.1.1 Oil Pan Removal Remove the oil pan as follows: 1. Drain the engine oil. See Figure 3-1 for location of the drain plug. Discard the drain plug seal. Figure 3-1 Engine Oil Drain Plug PERSONAL INJURY To avoid injury when removing or installing a heavy engine component, ensure the component is properly supported and securely attached to an adequate lifting device to prevent the component from falling. 2. Using a floor jack, jack up the vehicle and place it on stands located behind the front suspension. 3. Loosen all front suspension shackle bolts. 4.

Remove the front spring bolts and shock absorber bolts. Using the floor jack, lower the axle to the ground. All information subject to change without notice. 6SE412 0403 Copyright © 2004 DETROIT DIESEL CORPORATION 3-3