Detroit Diesel — Print Preview - C:\Temp\APTCACHE\6SE412A\6SE412A Detroit Diesel

MBE 4000 SERVICE MANUAL 3.2 OIL SPRAY NOZZLE Perform the following procedures for removal and installation of the oil spray nozzle. 3.2.1 Oil Spray Nozzle Removal Remove the oil spray nozzle as follows: NOTE: These procedures refer to bolt-on oil spray nozzles only. 1. Remove the oil pan. Refer to section 3.1.1. 2. Open the inspection cover on the flywheel housing and install the engine cranking tool (J 46167 or 407 589 00 63 00). See Figure 3-6. Rotate the crankshaft to gain access to the nozzles. 1. Inspection Cover Figure 3-6 Installing the Engine Cranking Tool All information subject to change without notice. 6SE412 0403 Copyright © 2004 DETROIT DIESEL CORPORATION 3-9