Detroit Diesel — Print Preview - C:\Temp\APTCACHE\6SE412A\6SE412A Detroit Diesel

MBE 4000 SERVICE MANUAL Table 3-6 Torque Values Oil Pump The oil pump inspection limits are listed in Table 3-7. Listed in Table 3-8 are the oil pump installation specifications. Table 3-7 Oil Pump Inspection Limits Table 3-8 Oil Pump Installation Specifications All information subject to change without notice.

6SE412 0403 Copyright © 2004 DETROIT DIESEL CORPORATION 3-37 Description Torque, N·m (lb·ft) Injector Unit Pump (IUP) Lubricator Bolt 20 (15) Main Oil Gallery - Engine Block Rear bottom plug - M26 x 1.5 150 (110) Main Oil Gallery - Inner Plug - M22 x 1.5 50 (37) Main Oil Gallery - Engine Block Rear Top Plug - M24 x 1.5 120 (88) Main Oil Gallery - Engine Block Front Plug - M22 X 1.5 100 (74) Main Oil Gallery - Engine RIght Hand Side Top Plug before the Oil Filter Housing - M18 x 1.5 60 (44) Main Oil Gallery - Engine Right Hand Side Bottom Plug before the Oil Filter Housing - M16 x 1.5 60 (44) Main Oil Gallery - Engine Right Hand Side Bottom Plug after the Oil Filter Housing - M16 x 1.5 60 (44) Description mm (inch) Diameter of Shaft Seat (in pump housing and face plate) 22.000-22.021 (0.8661-0.8670) Diameter of Idler Gear and Pump Drive Gear Shaft 21.93-21.94 (0.8634-0.8638) Clearance of Pump/Idler Gear to Walls of Pump Housing 0.030-0.122 (0.0012-0.0048) Gear Backlash (clearance between gear cogs) 0.312-0.476 (0.0123-0.0187) Description mm (inch) Projection of Pump Drive Gear 0.5 (0.02) Pump/Idler Gear End Play 0.050-0.128 (0.0020-0.005)