4.2 COOLANT PUMP 4.2 COOLANT PUMP Perform the following procedures for removal and installation of the coolant pump. 4.2.1 Coolant Pump Removal Remove the coolant pump as follows: HOT COOLANT To avoid scalding from the expulsion of hot coolant, never remove the cooling system pressure cap while the engine is at operating temperature. Wear adequate protective clothing (face shield, rubber gloves, apron, and boots). Remove the cap slowly to relieve pressure. 1. Drain the coolant from the engine. Refer to section 4.1.1. 2. Remove the fan. 3. Release the tension on the main drive belt and the fan belt and set the belts aside All information subject to change without notice.
4-8 6SE412 0403 Copyright © 2004 DETROIT DIESEL CORPORATION