MBE 4000 SERVICE MANUAL NOTICE: Failure to properly maintain coolant with SCA can result in damage to the cooling system and its related components. Conversely, over-concentration of SCA inhibitor can result in poor heat transfer, leading to engine damage. Always maintain concentrations at recommended levels. Do not use traditional SCAs with NOAT coolant. The proper application of SCA will provide:
pH control Restored inhibitor levels to prevent corrosion Water-softening to deter formation of mineral deposits Cavitation protection to protect wet sleeve cylinder liners 5.3.4 Recycled Antifreeze Recycled antifreeze that complies with TMC RP-329 Type “A” (for ethylene glycol) is approved for use in MBE 4000 engines. The antifreeze must be recycled by distillation, reverse osmosis, or ion exchange. Other recycled antifreeze, especially any antifreeze recycled by means of filtration processes, is not approved. 5.3.5 Corrosion Inhibitors Corrosion inhibitors are very important in maintaining engine life.
All corrosion inhibitors protect against corrosion caused by acid, and cavitation of wet cylinder liners. SCAs also protect against mineral deposits. The concentrations of some inhibitors will gradually diminish during normal engine operation. To protect the engine, nitrite concentration must be checked at regular intervals, and inhibitors added as necessary. The intervals are longer if NOAT inhibitors are used. All information subject to change without notice. 6SE412 0403 Copyright © 2004 DETROIT DIESEL CORPORATION 5-9