SPECIFICATIONS This section contains the specifications for servicing the engine. Coolant Listed in Table 5-3 are the coolant specifications. The coolant mixing ratio islisted in Table 5-4. Table 5-3 Coolant Specifications Table 5-4 Coolant Mixing Ratio All information subject to change without notice. 5-14 6SE412 0403 Copyright © 2004 DETROIT DIESEL CORPORATION Type of Coolant Requirement Fully-Formulated Ethylene Glycol TMC RP-329 Type "A" Water plus Corrosion Inhibitors Temperature Must Not Fall Below 32 F (0 C) Antifreeze Protection Down to F ( C) Water % by Volume Corrosion - Inhibiting Antifreeze % by Volume –34 (–37) 50 50 –62 (–52) 40 The cooling mix ratio is Max. 60