MBE 4000 SERVICE MANUAL TORQUE SPECIFICATIONS Listed in Table 4, listed in Table 5, listed in Table 6, listed in Table 7, and listed in Table 8 are the torque specifications for the MBE 4000 engine. * Coat all plated and unplated fasteners with oil before installation. Use these torque values if either the bolt or nut is lubricated or plated (zinc-phosphate conversion-coated, cadmium-plated, or waxed). Table 4 Torque Specifications Table One All information subject to change without notice. 6SE412 0403 Copyright © 2004 DETROIT DIESEL CORPORATION 35 Torque Values for U.S. Customary Thread Fasteners with Lubricated* or Plated Threads† Thread Diameter-Pitch Regular Hex, Torque:
lb·ft (N·m) Grade 5 Bolt Grade 5 or B Nut Grade 8 or 8.2 Bolt Grade 8 or C Nut 1/4–20 1/4–28 7 (9) 8 (11) 8 (11) 9 (12) 5/16–18 5/16–24 15 (20) 16 (22) 16 (22) 17 (23) 3/8–16 3/8–24 26 (35) 30 (41) 28 (38) 32 (43) 7/16–14 7/16–20 42 (57) 47 (64) 45 (61) 50 (68) 1/2–13 1/2–20 64 (87) 72 (98) 68 (92) 77 (104) 9/16–12 9/16–18 92 (125) 103 (140) 98 (133) 110 (149) 5/8–11 5/8–18 128 (173) 145 (197) 136 (184) 154 (209) 3/4–10 3/4–16 226 (306) 253 (343) 241 (327) 269 (365) 7/8–9 7/8–14 365 (495) 402 (545) 388 (526) 427 (579) 1–8 1–12 1–14 — — — 582 (789) 637 (863) 652 (884)