Detroit Diesel — Print Preview - C:\Temp\APTCACHE\6SE412A\6SE412A Detroit Diesel

7.4 EGR COOLER AND COOLER SUPPORT BRACKET 15. Fit lower coolant inlet pipe into the symmetric membrane. Install the two bolts in the metal gasket and engine block. Also install bolt in pipe support bracket. Torque both bolts to 35 N·m (26 lb·ft). 1. Lower Coolant Inlet Pipe 4. Shut off Valve Housing Bolt (2 qty.) 2. Membrane 4. Air Supply Line 3. Air Line Mounting Bolts Figure 7-34 Installing Coolant Inlet Pipe 16. Tighten EGR shutoff valve using two bolts. Torque to 35 N·m (26 lb·ft). 17. Install and attach air supply line using two mounting bolts. All information subject to change without notice. 7-42 6SE412 0403 Copyright © 2004 DETROIT DIESEL CORPORATION