MBE 4000 SERVICE MANUAL 4. Remove the three air lines. See Figure 10-2. 1. Discharge Air Line 5. Intake Air Line 2. O-ring 6. Hose Clamp 3. 90 Elbow 7. Unloader Air Line 4. Air Compressor Figure 10-2 Air Line Attachments PERSONAL INJURY To avoid injury from the sudden release of a high-pressure hose connection, wear a face shield or goggles. [a] Remove the discharge (compressed air) line and the 90 elbow. Check inside the discharge line for carbon deposits. If deposits are found, replace the discharge line. elbow on the discharge line must be removed to allow removal of the engine trim cover. NOTE: The 90 [b] Remove the unloader line. Check the fittings for damage and replace if necessary.
[c] Loosen the hose clamp and remove the intake (suction) air line. All information subject to change without notice. 6SE412 0403 Copyright © 2004 DETROIT DIESEL CORPORATION 10-5