MBE 4000 SERVICE MANUAL 2. If necessary, top off by filling engine oil through the oil fill cap until the maximum fill level on the oil dipstick has been reached. See Figure 11-2. 1. Oil Dipstick 2. Oil Fill Cap Figure 11-2 Oil Fill Cap 11.1.3 Checking the Coolant Level (Cold Check) Check coolant level as follows: 1. Ensure that all coolant plugs in the bottom of the radiator and on the radiator outlet pipe are secure and tight. 2. Check the coolant level. The cooling system is correctly filled when the coolant is between the maximum and minimum marks on the surge tank. 11.1.4 Adding Fuel When adding fuel, pay attention to the following:
Add winter or summer grade fuel according to the season of the year. Work in the cleanest conditions possible. Prevent water from entering the fuel tank. 11.1.5 Priming the Fuel System Prime the fuel system as follows: All information subject to change without notice. 6SE412 0403 Copyright © 2004 DETROIT DIESEL CORPORATION 11-5