Detroit Diesel — Print Preview - C:\Temp\APTCACHE\6SE412A\6SE412A Detroit Diesel

1.1 CYLINDER HEAD COVER 1. Remove the cylinder head cover bolts. See Figure 1-2. 1. Cylinder Head Cover Bolt 3. Cylinder Head Cover Gasket 2. Cylinder Head Cover 4. Cylinder Head Figure 1-2 Cylinder Head Cover Removal 2. Remove the cylinder head cover and gasket. Discard the gasket. 3. Clean the sealing surfaces of the cylinder head cover and the cylinder head. 1.1.2 Installation of Cylinder Head Cover Perform the following steps to install the cylinder head cover. 1. Install a new cylinder head cover gasket. 2. Place the cylinder head cover in position on the cylinder head. 3. Install the cylinder head cover bolts. Tighten the bolts 20 N·m (15 lb·ft).

All information subject to change without notice. 1-4 6SE412 0403 Copyright © 2004 DETROIT DIESEL CORPORATION