Detroit Diesel — Print Preview - C:\Temp\APTCACHE\6SE412A\6SE412A Detroit Diesel

13.1 SCHEDULED INTERVALS The descriptions of all maintenance operations, and the maintenance operation sets at which each operation must be performed are listed in Table 13-5 and listed in Table 13-6. * Coolant flushing and changing must be done at least every two years. Table 13-5 Required Maintenance Operations Sets, Schedule I * Coolant flushing and changing must be done at least every two years. For Schedule II and III, the valve lash checking and adjusting must be done first at 60,000 and then every M4. Table 13-6 Required Maintenance Operations Sets, Schedule II and III 13.1.2 Fuel/Water Separator Pre-Filter Element Cleaning Clean the pre-filter element as follows:

All information subject to change without notice.

13-8 6SE412 0403 Copyright © 2004 DETROIT DIESEL CORPORATION Operation Description M1 M2 M3 Engine Inspecting Valve Lash Checking and Adjusting Fuel /Water Separator Pre-Filter Element Cleaning Main Fuel Filter Element Changing Engine Oil and Filter Changing Coolant Concentration and Inhibitor Level Checking Coolant Flushing and Changing* Cooling System Inspecting Maintenance Operation Description M1 M2 M3 M4 Engine Inspecting Valve Lash Checking and Adjusting† Fuel /Water Sepator Pre-Filter Element Cleaning Main Fuel Filter Element Changing Engine Oil and Filter Changing Coolant Concentration and Inhibator Level Checking Coolant Flushing and Changing* Cooling System Inspecting