1.2 CYLINDER HEAD 1.2.2.2 Engine Compression Testing Perform the following steps to compression test the engine: Removal NOTE: Start this procedure only when the engine is cold. Wait at least 30 minutes after switching off the engine. 1. Set the parking brake and chock the tires. PERSONAL INJURY To avoid injury before starting and running the engine, ensure the vehicle is parked on a level surface, parking brake is set, and the wheels are blocked. 2. Remove the cylinder head cover. Refer to section 1.1.1. 3. Adjust the valve lash. Refer to section 1.19.3. NOTE: To do this procedure, coolant temperature must be between 155 and 205 F (70 to 95 C).
All information subject to change without notice. 1-18 6SE412 0403 Copyright © 2004 DETROIT DIESEL CORPORATION