MBE 4000 SERVICE MANUAL 3. Install the measuring plate (J 46071 or 402 589 00 21 00) on the cylinder block and cylinder liner. Fasten the measuring plate to the block by inserting the cylinder head bolts into the spacers and then threading them into the holes in the cylinder block. See Figure 1-26. 1. Cylinder Head Bolts Figure 1-26 Measuring Plate Installation 4. Tighten the cylinder head bolts 50 N·m (37 lb·ft). All information subject to change without notice. 6SE412 0403 Copyright © 2004 DETROIT DIESEL CORPORATION 1-37