Detroit Diesel — Print Preview - C:\Temp\APTCACHE\6SE412A\6SE412A Detroit Diesel

MBE 4000 SERVICE MANUAL 7. Insert the constant-throttle valve (CTV) spring remover (442 589 05 63 00)down onto the spring retainer. Remove the collets with a magnetic pin. See Figure 1-37. 1. Collets 3. Spring 2. Spring Retainer Figure 1-37 Compressing the Spring 8. Relieve the pressure on the spring. Remove the spring retainer, spring and spring guide. For ease of installation, mark the spring retainer and spring guide with a paint pen. 9. Turn over the cylinder head. From the bottom of the cylinder head, draw out the valve and spacer. For ease of installation, mark the valve with a paint pen. 10. Using a small hook, remove and discard the valve stem seal. NOTE:

Always replace the valve stem seal whenever the constant-throttle valve is removed. 11. Repeat this procedure for each constant-throttle valve. All information subject to change without notice. 6SE412 0403 Copyright © 2004 DETROIT DIESEL CORPORATION 1-49