OPERATION MACHINE OPERATIONS AND CONTROLS 1) The buzzer will sound for approx. 1 sec, and the fol- lowing monitors and gauges will light up for approx. 3 sec. Engine oil level monitor (3) Charge level monitor (4) Fuel level monitor (5) Engine water temperature monitor (6) Engine oil pressure monitor (7) Engine water temperature gauge (8) Fuel gauge (9) Engine pre-heating lamp(10) Air cleaner clogging monitor(11) Swing lock lamp (12) Replacement monitor of engine oil (13) If the monitors or gauges do not light up or the buzzer does not sound, there is probably a broken bulb or discon- nection in the monitor wiring, so contact your Komatsu distributor for repairs. After approx.
3 sec, the following gauges will remain on and the other monitors will go out. Charge level monitor (4) Engine oil pressure monitor (7) Engine water temperature gauge (8) Fuel gauge (9) 2) Press lamp switch (14) and check that the front lamp lights up. If it does not light up, there is probably a blown bulb or disconnection, so contact your Komatsu distribu- tor for repairs. 3-69