Komatsu — PERMISSIBLE WATER DEPTH

OPERATION MACHINE OPERATIONS AND CONTROLS GENERAL OPERATION INFORMATION TRAVELING When traveling over obstacles such as boulders or tree stumps, the machine (in particular, the undercarriage) is sub- jected to a large shock, so reduce the travel speed and travel over the obstacle at the center of the tracks. As far as possible, remove such obstacles or avoid traveling over them. HIGH SPEED TRAVEL On uneven roadbeds such as rock beds or uneven roads with large locks, travel at Lo speed. When Hi-speed traveling, set the idler in the forward direction.

PERMISSIBLE WATER DEPTH CAUTION When driving the machine out of water, if the angle of the machine exceeds 15є, the rear of the upper structure will go under water, and water will be thrown up by the radia- tor fan. This may cause the fan to break. Be extremely careful when driving the machine out of water. Do not drive the machine in water deepen than of the center of carrier roller(1). Supply grease to the parts which have been under water for a long time until the used grease is projected out of the bearings (around the bucket pin, in particular). 3-93