Komatsu — LOADING

TRANSPORTATION OPERATION 6. If the machine is equipped with work equipment, set the work equipment at the front, and travel forward to load it; if it has no work equipment, travel in reverse to load it. 7. When the machine travels over the rear wheels of the trailer, it will become unstable, so travel slowly and care- fully. (Never change the direction of the machine under any circumstances.) 8. Turn the swing lock switch OFF to release the swing lock, then swing the upper structure slowly 180°.

When the machine passes the raised area above the rear wheels, it will tilt to the front, so be extremely careful not to let the work equipment hit the body of the trailer, then travel forward to the specified position. 9. Stop the machine at the specified position on the trailer. 10. Turn the swing lock switch ON to lock the swing lock. 3-108