TRANSPORTATION OPERATION REMOVING, INSTALLING MIRRORS The mirrors are at the positions shown in the diagram on the right. ( : if equipped) If they are damaged, or are to be removed for shipment, or are to be installed again, use the following procedure. Removal 1. Loosen locknut (2) of mirror (1), then remove mirror (1) from support (3). 2. Loosen bolt (4), then remove support (3) and clamp (5) from the handrail. Installation 1. Install support (3) and clamp (5) to the handrail, then tighten bolt (4). 2. Install mirror (1) to support (3), then tighten locknut (2). 3-110