ATTACHMENTS AND OPTIONS MACHINES READY FOR ATTACHMENTS LONG-TERM STORAGE If the equipment is not to be used for a long period, do as follows. Set the stop valve to the LOCK position. Install the blind plugs and O-rings to the valves. Set the selector valve to the "when not use" position. Lock the lock pin to the lock position. If the pedal is operated when there is no breaker or general attachment installed, it will cause overheating and other problems. SPECIFICATIONS Hydraulic specifications Max.
merging oil flow 214Ч2 liters / min Safety valve of service valve Relief setting pressure 27.47MPa (280kgf / cmІ) (except B mode) Safety valve of service valve Cracking pressure 24.53MPa (250kgf / cmІ) (except B mode) Safety valve of service valve Relief setting pressure 20.60MPa (210kgf / cmІ) (B mode) Safety valve of service valve Cracking pressure 15.21MPa (155kgf / cmІ) (B mode) In addition to the valves listed above, a safety valve with relief setting pressure of 24.53 MPa (250kgf / cmІ) and a safety valve with cracking pressure of 20.11 MPa (205 kgf / cmІ )are available. Consult the Komatsu distributor in the territory. 6-17