Komatsu — CHECK ROAD LINER (MACHINES EQUIPPED WITH ROAD LINER)

ATTACHMENT GUIDE ATTACHMENTS AND OPTIONS STORAGE AND MAINTENANCE Take care that no oil or grease sticks to the rubber. If it does, wipe it off immediately. Install rubber pad shoes and Road Liner (A) corresponding to the number of the links. If there is any missing pad or liner, the rubber will be greatly deformed and damaged. If rubber pad shoes or Road Liner (A) has to be stored for a long period, keep it indoors to avoid direct sunlight and rain. EXTENT OF DAMAGE TO RUBBER When traveling on a concrete pavement, rubber may stick to the road surface, leaving a dark track behind. It is the time for replacement.

The rubber is still usable, even if it does not look in good shape with part of the rubber chipped or cuts devel- oped on the surface, so long as damage has not developed all over the shoe or it does not damage a road sur- face. CHECK ROAD LINER (MACHINES EQUIPPED WITH ROAD LINER) If the road liner are in the following condition, they must be repaired or replaced, so please contact your Komatsu distributor for repair or replacement. Height of lug If lug height "a" is reduced by wear, the drawbar pull will drop. If "a" is less than 5 mm (0.2 in), replace with a new part. When making judgement whether to replace, repair, or contiune using road liner, please contact your Komatsu dis- tributor.

Replace road liner When all the road liners of the machine need to be replaced, ask your Komatsu distributor to replace them. When only some of the road liners need to be replaced, replace them by using the road liner replacing tools. Order the tools from your Komatsu distributor. 6-26