OPERATION EXPLANATION OF COMPONENTS AUTO-DECELERATION SWITCH When this auto-deceleration switch button (2) is depressed, the auto-deceleration is actuated, if the control levers are in the neutral position, and the engine speed is automatically lowered to reduce fuel consumption. The auto-deceleration lamp "ON": The auto-deceleration is actuated. The auto-deceleration lamp "OFF": The auto-deceleration is released. Every time the switch button is depressed, actuation and release alternate. TRAVEL SPEED SELECTOR SWITCH WARNING When loading or unloading from a trailer, always travel at low speed. Never operate the travel speed selector switch during the loading or unloading operation.
If the travel speed is switched between high and low when the machine is traveling, the machine may deviate to one side, even when traveling in a straight line. Stop the machine before switching the travel speed. This switch(3) is used to select high or low travel speed. Lo lights up: Low-speed travel Hi lights up: High-speed travel When the engine is started,it is automatically set to Lo. When traveling at high speed (Hi),if travel power is needed when traveling on soft ground or slopes,the travel speed is automatically set to low speed travel (Lo),so there is no need to operate this switch. On the monitor display,the Hi (high speed) lamp stays lighted up.
WIPER SWITCH This switch (4) actuates the front window wiper. ON lights up: The wiper works continuously. INT lights up: The wiper works intermittently. OFF: The wiper stops. 3-15