EXPLANATION OF COMPONENTS OPERATION CAP, COVER WITH LOCK Locks are fitted to the fuel tank filler, hydraulic tank filler, opera- tor's cab, engine hood, battery box cover, right side door of the machine, and left side door of the machine. Use the starting key to open and close the caps, doors and covers. Insert the key as far as it will go, then turn it. If the key is turned before it is inserted fully, it may break. METHOD OF OPENING AND CLOSING CAP WITH LOCK When opening 1. Insert the key into the key slot. 2. Turn the starting switch key counterclockwise, align the key slot and counter mark on the cap, then open the cap. REMARK Type A is used for the fuel tank cap.
Type B is used for the hydraulic tank cap. With type A, the cap is locked if it rotates freely. When it rotates, the cap does not come off from the tank. Turn the starting switch key counterclockwise, align the groove in the rotor with the counter mark on the cap, then turn the cap slowly, and when a click is heard, the lock is released and the cap can be opened. When locking 1. Screw in the cap, then insert the key in the key slot. 2. Turn the starting switch key clockwise, then remove the key. METHOD OF OPENING AND CLOSING COVER WITH LOCK To open the cover (locked cover) 1. Insert the key into the key slot. 2. Turn the key counterclockwise and open the cover by pulling the cover grip.
To lock the cover 1. Close the cover and insert the key into the key slot. 2. Turn the key clockwise and take the key out. 3-32