Komatsu — METHOD OF OPERATION

EXPLANATION OF COMPONENTS OPERATION 2. Press vent selector switch (4) and set the vent display on the display monitor to the display shown in (f) or (g) in the diagram on the right. 3. Press FRESH/RECIRC selector switch (6) and set it to take in fresh air. 4. Press temperature setting switch (3) and set the set tem- perature display on the display monitor to the maximum heating temperature of 32.0. 5. Adjust vents (A), (B), and (D2) so that the air blows onto the window glass. (Vents (C) and (D1) are fixed and cannot be adjusted.) 3-44