SAFETY 2.1 SAFETY INSTRUCTIONS INSTRUCTIONS FOR USE Open the lock, lift the harness by the catch hook (C), the blue straps (leg straps J) are below. The harness is being put on just like a jacket. Pull the belly strap (E) through the lock, as shown on the illustration, and secure it. By closing the breast strap, you avoid the shoulder straps to side- slip. Bring the leg straps (J) around the legs to the front, pull them in, as shown in the illustration, and tighten them. Adapt the har- ness to body form, seeing to perfect fit, in particular that the catching hook (C) be in the center of the back. The safety harness should belong to its wearer personally.
The safety harness should only be used together with connectors acc. to EN 354, and fall arrest acc. to EN 355, or fall protection devices acc. to EN 360. The attachment point for the safety harness should be above the wearer, and the carrying capacity of the attachment point should be sufficient to correspond with the minimum carrying capacity acc. to EN 795. 31