SAFETY 2.1 SAFETY INSTRUCTIONS INSTRUCTIONS FOR USE Strap-Type Fall Absorber acc. to DIN EN 355 (Type E.K.N.-BFD) Use Within a fall-arrest system, the strap-type fall absorber (2) has to be used in conjunction with a safety harness (1) acc. to DIN EN 361. The maximum length including the safety rope must not exceed 2.0 m. For longer ropes, a rope-shortening device has to be applied in addition. Fix the rope to the attachment point and attach the strap-type fall absorber to the catching hook in the back of the safety harness. The attachment point should be above the wearer and its mini- mum carrying capacity should be 10 KN, acc. to DIN EN 795.
The strap-type fall absorber and the safety rope must not be dam- aged, e.g. never pull them over sharp edges nor get them burnt by welding sparks. Storing and maintenance The strap-type fall absorber has to be kept dry in an airy and shady room. It must not be ex-posed to acids, caustic chemicals, nor to an aggressive atmosphere, and contact with oils has to be avoided. If the strap-type fall absorber is dirty, it may be cleaned with a little water and a light-duty detergent. Dry it in a shady place (nowhere near fire or other sources of heat). Protect it from sharp-edged objects. Inspection Prior to use, all parts have to be inspected for safe condition and damages.
At least once a year, the strap-type fall absorber has to be tested by a competent person. A damaged or used strap-type fall absorber has to be removed from service immediately. The strap-type fall absorber must not be changed in any way. Repair work has to be done by the 35