Suspension 32 Neway Spring Assembly U-Bolt High Nut Torque Values * No lubrication is required on Neway rear suspen- sions. Reyco Size Torque: lbf·ft (N·m) 1–14 Stage 1: Hand tighten Stage 2: 60 (81) Stage 3: 200 (271) Stage 4: 520 to 600 (707 to 816) No lubrication is required on Reyco rear suspen- sions. * Tighten in a diagonal pattern as shown in Fig. 17 . Table 1, Spring Assembly U-Bolt High Nut Torque Values 32–03 Suspension U-Bolt Torque Check 4 1 Failure to retorque the U-bolt nuts could result in spring breakage and abnormal tire wear. 1. Park the vehicle on a flat surface and apply the parking brakes. Chock the tires to prevent the vehicle from moving. 2 3 2.
Check the U-bolt high nut torque in a diagonal pattern. Set a click-type torque wrench to the highest torque value for the fastener being checked. See Table 1 for U-bolt torque specifica- tions. Turn the wrench in a clockwise motion (looking up) until the torque wrench clicks. f320783 10/05/2016 Fig. 17, Tightening Pattern for U-Bolt High Nuts Remove the chocks. Spring Assembly U-Bolt High Nut Torque Values * Size Torque: lbf·ft (N·m) Stage 1: Hand Tighten Stage 2: 60 (81) Stage 3: 200 (271) Stage 4: 180 to 230 (245 to 313) 5/8–18 3/4–16 Stage 1: Hand Tighten Stage 2: 60 (81) Stage 3: 200 (271) Stage 4: 270 to 330 (367 to 449) Stage 1: Hand Tighten Stage 2: 60 (81) Stage 3: 200 (271) Stage 4:
420 to 500 (571 to 680) 7/8–14 Century Class Trucks Maintenance Manual, January 2016 32/10 CAUTION