Freightliner — Century Class Maintenance Manual

Brakes 42 Brake Component Inspection If a band shows, the stroke is too long. Check the foundation brake components for wear or damage, and repair as needed. See Group 42 of the Century Class Trucks Workshop Manual for inspection, troubleshooting, and repair proce- dures. 1. Park the vehicle on a level surface, set the park- ing brake, and chock the tires. Once the tires are chocked, release the parking brake. WARNING 4. Measure the applied chamber stroke. See Table 1 for the proper stroke for the type of chamber being used. If the stroke is too short, the brakes may drag or will not fully apply. Check for improper operation or adjustment of the auto- matic slack adjuster.

See Group 42 of the Century Class Trucks Workshop Manual for in- spection and troubleshooting procedures. Manually adjusting an automatic slack adjuster to bring the pushrod stroke within legal limits is likely masking a mechanical problem. Adjustment is not repairing. Before adjusting an automatic slack adjuster, troubleshoot the foundation brake system and inspect it for worn or damaged com- ponents. Improperly maintaining the vehicle brak- ing system may lead to brake failure, resulting in property damage, personal injury, or death. 5. Start the engine and build air pressure to at least 100 psi (689 kPa). Shut down the engine. 2.

With the engine off, and 100 psi (689 kPa) of air tank pressure, have an assistant apply and hold an 80 to 90 psi (550 to 620 kPa) brake applica- tion. 6. Check all of the foundation brake components for damage, wear, and loose or missing parts. Re- pair as needed. See Group 42 of the Century Class Trucks Workshop Manual for repair proce- dures. 3. Check to see if the colored over-stroke band on each brake chamber pushrod is exposed. Brake Chamber Stroke Specifications Chamber Max Applied Stroke:

inch (mm) Manufacturer Type * Size 9 1-3/8 (35) 12 Standard Stroke 16 1-3/4 (44) 20 24 30 2 (51) Gunite 36 2-1/4 (57) 16 2 (51) 20 Long Stroke 24 (2-1/2 inch rated stroke) 24 (3 inch rated stroke) 2-1/2 (64) 30 Century Class Trucks Maintenance Manual, January 2016 42/10