Freightliner — Century Class Maintenance Manual

Frame and Frame Components 31 C 1 E 2 D 3 A F 09/02/2009 f311100 1. Jam Nut 2. Adjustment Bolt 3. Grease Zerk Fig. 10, Jost Fifth Wheel G H 9.1 Check the bracket for any cracks or miss- ing and damaged parts. B 9.2 Inspect the locking plungers for full en- gagement. 09/01/2009 f311099 9.3 Check the locking mechanism for proper operation. A. Checking for fore/aft play B. Rotating tester in lock C. Engage hook D. Pull/push handle fore/aft. E. Check for movement of kingpin in lock F. Disengage hook G. Push/pull handle inboard/outboard H. Rotate lock tester If the plungers will not release, check the air cylinder or plunger adjustment.

If the plungers are loose, check the plunger adjustment and the plunger springs for proper compression. Replace if needed. Fig. 9, Jost Fifth Wheel Adjustment 9.4 The outboard slider assembly requires no adjustment. If the plungers are loose, in- spect and replace locking mechanism parts as needed. mechanism several times to test. Repeat if nec- essary. See Fig. 10 . 9. If the fifth wheel is equipped with a sliding mechanism, inspect and adjust it as follows. 9.5 The inboard slider is adjustable for frame width and plunger engagement. For ad- Century Class Trucks Maintenance Manual, January 2016 31/6