. OPERATION MACHINE OPERATIONS AND CONTROLS Check Coolant Level, Add Coolant WARNING 3 - 80 8. Check for proble m in gauges, monito Check for proble m in the gauges and monitor in the o perator's cab. If any problem is fou nd, replace the parts. Clean off any dirt 9. Clean, check rea Check that there is no damage to the r ear view mirror. I f it is damaged re pair. Clean the sur face of the mirror and adjust the angle so that the area at th e rear ca n be se en from the ope 10. Seat belt and mo Check for damag e or wear to the seat belt and mountin g clamp s. If ther e is any damage, re place with new parts.
Checks Before Sta Always check the ite ms in this section be fore starting the engine e ach day Do not open the radi ator cap unless necess ary. When checkin g the coolant, alwa ys wait for the engine to cool down and check the sub tank. Immediately after the engine is stopped, th e coolant i s at a hig h temperature and the radiator is under high internal pressure. If the cap is remove d to check the coolant level in thi s conditi on, there is a haz ard of burns. Wait fo r the temperature to go down, then turn the cap slowly to release t he pressur e and re move it ca refully. 1.
Open rear cover (1) at left side of t he machine, an d check coolant level is b etween the FULL an d LOW li nes in s ub tank (2). If the level i s low, open top co ver (3) a nd add coolant check coolant coolant through filler (4) of sub tank to the FU LL line. 2. After adding cool ant, tighten the cap securely. 3. If sub tank (2) is empty, check for le aks, then coolant level in the radia tor. If the coolant lev el is low, add coolant to the radiator, then add coolant to sub tank (2).