Komatsu — MONITORING SYSTEM

. OPERATION DETAILED CONTROLS AND GAUGES OPERATION DETAILED CONTROLS AND GAUGES Fan the (Press Back switch (8) to return to the previous screen.) low normal. display. 3 - 27 2. the outside of the machi ne. This can be used when clea to remove insects or dirt stuck to the net. Check first that there is n o flammable or burning material i surrounding area that wil l be sucked in, then operate the s to rotate the fan in rever 3. Set lock lever (1) secure 4. Use UP switch (9) or D OWN switch (10) to select "01: reverse rotation", then p ress input confirmation switch (1 accept the input. The s right (green display).

To switch the fan to reve creen changes to the screen on rse rotation, press input confirm switch (11). 5. When the fan rotation is b eing changed, the screen chang the waiting screen. Th e engine is automatically set to idling, and after approx. 1 5 seconds, the fan rotates in rev NOTICE The fan rotation speed is pro portional to the engine speed. Whe n the engine is running at low idlin g, the fan also rotates at minimum speed. If it is desir ed to raise the fan rotating speed, us e the fuel control dial to raise the engine speed. When rotating the fan in reve rse with the engine stopped, change to this screen, then turn the star ting switch to the START position.

This screen does n ot change until the engine starts, so if it is desired to cancel, turn the s tarting switch to the OFF position. 6. When the fan rotates in reverse, the screen swit automatically to the scre en shown on the right (yellow disp While the fan is rotating in reverse, the screen maintains