5 © 2001 5.1 Maintenance Schedule Routine Maintenance Operation Section Injection valve # Intercooler (drain lube oil/condensation) # CPD compressor outlet # Basic overhaul of emission related parts # check = adjust = clean = replace = max. recommended standard times in operating hours (HO) of all prior to or during 1st trial run, check 2x daily during the breaking in phase or when commissioning new and overhauled engines every 10 hours of operation or daily years E10 E20 E30 E40 E50 E60 E70 250 500 1000 2000 3000 4000 1 2 In hours of operation (HO) every check = ● adjust = ❍ clean = ◆ replace = ■ max.
recommended standard times in operating hours (HO) of all Additions and modifications for engines with EPA approval The specified engine maintenance values are permissible recommended maximums. Depending on usage, reduced maintenance intervals may be necessary, comply with the unit manufacturer’s operating instructions.
# Maintenance must only be carried out by authorised service personnel Section prior to or during 1st trial run, check 2x daily during the breaking in phase or when commissioning new and overhauled engines every 10 hours of operation or daily In hours of operation (HO) every years E10 E20 E30 E40 E50 E60 E70 250 500 1000 2000 3000 4000 1 2 Operation every 10 hours of operation or daily In hours of operation (HO) every years E20 E30 E40 E50 E60 E70 250 500 1000 2000 3000 4000 1 2 Operation In hours of operation (HO) every years E30 E40 E50 E60 E70 250 500 1000 2000 3000 4000 1 2 Operation ■ Injection valve # ◆ Intercooler (drain lube oil/condensation) # ◆ CPD compressor outlet # ■ Basic overhaul of emission related parts #