6 © 2001 6.9 Additional Maintenance Work Service and Maintenance © 24 717 1 Test step 3 Loosen screw 1. Remove glow lamps 2 Turn engine over with starter, key in switch- ing position 3. Fuel must be present on the glow lamps 2, or replace glow lamps 2 if necessary. When fitting glow lamps 2, use DEUTZ DW 47 sealants. Reinstall glow lamps to fuel line. Collect any escaping fuel and dispose of this in an environ- mentally-friendly manner. Test step 2 Loosen screw 1. Turn engine over with starter, key in switch- ing position 3. Fuel must be present on the loosened pipe connection. Otherwise, the system and solenoid valve should be checked by a specialist!
© 24 717 1 © 24 717 1 © 24 717 1 © 24 717 1