Technical Specification 9.1 Engine Specifications and Settings F3L 914 F4L 914 F5L 914 F6L 914 3 4 5 6 3236 4314 5393 6472 270 5) 300 5) 380 5) 410 5) 9,0 3) 12,0 3) 13,5 3) 14,5 3) 9,6 3) 13,0 3) 15,0 3) 16,0 3) 4-stroke naturally aspirated diesel engine Inlet 0,15 + 0,05 / exhaust 0,15 + 0,05 Pre-tension / re-tension 2) vertical in line Direct injection counter-clockwise Pressure lubrication 450 / 300 ± 20 550 / 400 ± 20 15W 40 200 + 10 102 132 20 1) 1) 135 0,4 4) 1) 1) Engine output, speed, start of delivery are stamped on engine rating plate, etc., (see also 2.1). 2) Re-tension 15 minutes after the engine has been operated under load. 3) Approx. values may vary depending on version.
The upper oil dipstick mark is always authoritative. 4) Values for engines without engine oil heating. 5) Approx. values may vary depending on version. Model Number of cylinders Cylinder arrangement Bore [mm] Stroke [mm] Total displacement [cm 3 ] Compression ratio [ ε ] Working cycle Combustion system Direction of rotation seen on flywheel Weight including cooling system to DIN 70020-A without starter or alternator [approx. kg] Engine output [kW] Speed [rpm] Lubrication SAE oil Oil temperature in oil pan [°C] Min. oil pressure when warm (120 °C) and low idle [bar] ЦOil plate filling quantity without filter [approx. litres] Oil plate filling quantity with filter [approx.
litres] Valve clearance with cold engine [mm] Injector opening pressure [bar] Start of feed [°KW of TDC] Firing order of the engine V-Belt tension: Alternator fan [N] Compressor [N] © 2001 9