OWNER 爷 S MANUAL JAC High end Light Trucks Right and left side boards Outer lights 1. Release the lock knuckles of the rear board. Front: 2. Move the fastened handle leftward before putting down the vertical lock out 鄄 1.Front turn signal lamps; wards to release it. 2.Fog light; 3.Front side-marker light; 4. Headlight. 3. Lift up the hook handle on the front end of the side board to release the front hook. 4. At this time, the front end of the side board is still fastened by the board Rear: The rear light set is installed in the position shown on the left figure, with the clamp. Pull out the board clamp with force to let free the side board. following: 5.
To close the side board, securely lock up the front end of side board with the Rear fo g light Revers e light 1. Back-up light; hook handle, and put it into the vertical lock of the rear board before fastening it with the handle. Turm signal light Brake light 2. Turn signal lights; 3. Brake lights; Rear light Non-return reflector 4. Rear side-marker light; 5. After-reversion reflector. 32 33