daewoo — Daewoo Wheel Loader Shop Manual

Disassembly It is very important to keep the inside of the steering unit clean. Make sure that the outside of the steering unit is clean before opening the unit. Use a wire brush and solvent to clean the entire unit. 4. Lift the cylinder gear off the unit. See Figure 5-13. Remove the 2 O-rings. 1. Remove the steering column from the steering unit. Bolt the steering unit to the stabilizing base. Bolt the base to the work bench. 2. Remove the bolts from the steering unit end cover. See Figure 5-11. FIGURE 5-13 4942 5. Remove the spacer bushing and spacer from the cylinder gear. See Figure 5-14. FIGURE 5-11 4940 3. Remove the end cover from the unit. See Figure 5-12.

FIGURE 5-14 4943 FIGURE 5-12 4941 5-8 POWER STEERING MEGA 300-III Shop Manual