daewoo — Daewoo Wheel Loader Shop Manual

Parking Brake If the electrical supply to the parking brake solenoid valve is interrupted, or if the engine is shut off, the parking brake is automatically applied. A disc type parking brake is attached to the input shaft on the front axle. See Figure 6-6. This brake is spring applied and hydraulically released. When the parking brake switch in the operator’s cab is moved to the brake release position, the parking brake solenoid valve opens and directs fluid from the brake pump to the brake cylinder (18). Maximum parking brake hydraulic pressure is 100 bar. The brake cylinder retracts the brake set spring (22), and releases the brake.

As a safety feature, the transmission forward/ reverse gear selector must be in the neutral posi- tion and the parking brake switch must be in the ON position, in order to start the engine. When the parking brake switch is on, a warning light glows. If either forward or reverse is selected on the transmission while the parking brake switch is on, a buzzer will sound. FIGURE 6-6 4926 Mega 300-III Shop Manual AXLES 6-9