Lubricating Grease Fittings 1. The following fittings are greased daily, or every 10 hours. If the bucket is being used in water, grease fittings 1A through 1D immedi- ately after the machine is removed from the water. See Figure 3-1. B. Bucket cylinder head ends. See Figure 3-3. Greased from two remote grease points (1, Figure 3-4). 2 places on each side of bucket. A. Bucket hinge pins, 1 place on each side of bucket. See Figure 3-2. Bucket link pins, FIGURE 3-3 2036 Bucket cylinder rod ends, one place each side of bucket. See Figure 3-5.
FIGURE 3-2 2035 3-4 INSPECTION, MAINTENANCE AND ADJUSTMENT MEGA 300-III Shop Manual Inspection and Maintenance Replacement of Lubricants and Filters FIGURE 3-1 2822