Locations of Safety Labels 1. Warning for operation, inspection and maintenance (2190 – 2530). Always keep these labels clean. If they are lost or damaged, attach them again or replace them with a new label. Make sure replacement parts have current labels. CAUTION There are other labels in addition to the safety labels that follow so handle them in the same way. Safety labels may be available in languages other than English. To find out what labels are available, contact your Daewoo distributor. Read manual and labels before operation and mainte- nance. Follow instructions and warnings in manual and on labels on the machine.
Never get in under the machine while it is being jacked up with boom and arm. For transporting the machine, the swing lock must be hung on. Turn Auto-Idle switch OFF, when loading the machine. Sound the horn to alert the people nearby before oper- ating, and make sure all persons are clear of area. Always make sure when leaving operator’s seat to: Lower bucket or other working tools to the ground. Move SAFETY LOCK DEVICE (located near seat) to LOCK position. Turn key switch OFF. Remove key from switch. If hydraulic components and units are ABNORMAL, consult nearest DAEWOO dealer or authorized service shop. Do not attempt to make an overhaul. 2. Warnings for high voltage.
DANGER Serious injury or death can occur if machine or attachments contact with electric lines. Never move any part of unit or load closer to electric lines than 3 m (10') plus twice the line insulator length. 3192 1-2 SAFETY Mega 300-III Shop Manual