25. Unthread and then remove the socket for the temperature sensor. See Figure 4-90. 26. Unthread and remove the plug from the con- verter oil control valve. See Figure 4-91. Remove the spring clip and then remove the parts for the control valve. FIGURE 4-90 4529 FIGURE 4-91 4530 27. Position the transmission so that the input side is laying down on the work surface. This will position the Power Takeoff (PTO) assem- bly facing upward. An exploded view drawing that contains internal transmission compo- nents is shown in Figure 4-92. 4-28 TORQUE CONVERTER AND TRANSMISSION Mega 300-III Shop Manual