COMPONENT OPERATION / Pilot Valve Electromagnetic Detent Coil for detent is installed at the push rod part of the pilot valve. 1. When one of the control levers is tilted, push rod (2) and plate (8) of the other are pushed upwards by the spring force. 2. If the control lever is operated until its stroke end, plate (8) of the other is adsorbed by coil assembly (10). 3. Adsorbed condition is retained until the coil assembly is unexcited or until adsorption is forcefully cancelled by moving the control lever the other way around. T4GB-03-05-007 2 - Push Rod 8 - P ｌａｔｅ 10 - Coil Assembly T3-6-6 2 10 8