Maintenance - Section 40 OM4042 Page 40-12 Lubrication and Service 1. ,000 HOUR LUBRICATION AND MAINTENANCE CHECKS Truck Serial Number Site Unit Number Date ______________________ _______________ _______________ Hourmeter Name of Service Technician _____________ ___________________________________ TASK COMMENTS CHECKED INITIA WHEEL MOTORS - Clean the area around the grease ports to prevent dirt or other contaminates from entering. Remove the six grease port plugs on each wheel motor. Grease the inboard and outboard wheel hub bearings with 414 mL (14 oz) of grease per each grease port. Complete the 10, 50, 100, 250, 500, 1000, 2500, and 5000 hour lubrication and maintenance checks.
Truck Serial Number Site Unit Number Date ______________________ _______________ _______________ Hourmeter Name of Service Technician _____________ ___________________________________ TASK COMMENTS CHECKED INITIA LS WHEEL MOTORS - Clean the area around the grease ports to prevent dirt or other contaminates from entering. Remove the six grease port plugs on each wheel motor. Grease the inboard and outboard wheel hub bearings with 414 mL (14 oz) of grease per each grease port.