3.4 ELECTRONIC MONITORING AND CONTROL SYSTEM ECS OPERATION Information No. 1382: (1384) # Central lube system grease container on reserve. Replace or fill grease container. Information No. 1386: (1388) # Hydraulic oil below operating temperature! Pre-heat hydraulic oil or warm up at low idle speed and reduced power. # Emergency shut-down switch S33A at the radiator door was actuated. Unlock before restarting. Information No. 1390: (1392) Information No. 1394: (1396) # Emergency shut-down switch S33C in the pump compartment was actuated. Unlock before restarting. Information No. 1398: (1400) # Engine 1 reserve oil tank empty. - Fill tank before next shift. Information No. 1402:
(1404) # Engine 2 reserve oil tank empty. - Fill tank before next shift. Information No. 1430: (1432) # SERVICE: Central lubrication system. Information No. 1434: (1436) # SERVICE: Swing ring gear lubrication system. Information No. 1440: (1445) # Remark to Maintenance calls. The maintenance calls integrated in the ECS system are to be performed according to the maintenance section in the operation and main- tenance manual. The routine visual checks, lubrication work and engine maintenance are not called up. Please pay attention to the Service Literature. Information No. 1450: (1455) # Initial 250 h Maintenance Perform initial 250 h Maintenance. 180